Sometimes the camera app on your iPhone does not get loaded properly, which causes the camera black screen problem. In that case, fix the issue by closing the app of the camera forcefully. To operate such a function, get the preview of the app by tapping the Home button twice. Now, swipe up the interface of the camera and close the cam-app.
After doing that, wait for 5 minutes and restart your phone again. Sometimes the camera app on your iPhone does not get loaded properly, which causes camera black screen problem. The good thing about iOS devices is that they provide several native solutions to fix an unwanted issue. For instance, by applying the correct key combinations, you can boot your phone in the recovery mode. This will let you update your device to the latest firmware version or simply restore it to factory settings. To help users take photos in dark night, Apple has integrated camera flash on latest iPhone models.
And later, Apple released the flashlight feature. However, this simple LED part is not simple at all, since many users complain iPhone 7 flashlight not working on forums. It is annoying to communicate to Apple customer service every time flashlight disabled. So, we are going to tell you the best solutions to fix iPhone flashlight stop working problem by your own. Then you can save a lot of time and telephone charges. Next time when your iPhone flashlight does not turn on, you can follow our guides to solve it in a few seconds easily.
If reopening the Camera app did not help you, switch between the front and rear cameras to check if they are working or not. This may sound very basic, but this trick has helped a lot of users to fix the black screen or camera not working problems on their iPhones. If you're unable to use the front camera, try switching to the rear camera by tapping the camera flip icon available at the bottom-right of the screen.
This is because switching from the front to the rear camera usually resets the camera app and brings back the view through the selected lens back into focus. If you failed to turn off the torch in Control Center, you can just turn it off from lock screen. Press the power button to lock the screen, now the light is still on. Then unlock your device and tab camera icon, the flashlight will be off immediately.
Since iPhone's camera needs to access LED flash, it automatically turns off the flashlight feature. When the iPhone rear camera not working, try this solution as well. To turn off your phone, press and hold the sleep/wake button, then drag the slider to power off. Usually, when you do this, which is basically a restart, you turn it back on right away. Wait for about 30 seconds, and then turn it back on. Provided you don't have a hardware-related issue, you can fix a problem with your camera not working by following a few basic troubleshooting steps.
In some cases, you could have the flash turned off. If that simple solution doesn't solve your problem, you can try resetting the camera software all the way up to completely restoring your iPhone to its original factory default settings. Provided you create a backup of your iPhone before completing the restore process, you don't need to worry about losing your data. If you're using an iPhone 6s or later, you can take advantage of the Raise to Wake feature. Once you enable it, simply lift your handset to view notifications.
Although the lock screen will light up and display new alerts, the phone will remain locked and secure. To set it up, open Settings, tap Display & Brightness, and activate the Raise to Wake option. Recently, some iPhone users have reported that their iPhone camera and flashlight not working after dropped, iOS update or water damage. Others have also encountered flashlight became grey and not responding. Actually, flashlight feature on iPhone not working does not always mean hardware issue. In most cases, you can solve the problem with some simple methods.
Here we'll share you 5 easy ways to fix iPhone flashlight problems within minutes. Note that this method is going to require you to have iOS 7 installed on your iPhone. If you aren't sure which version of iOS is currently on your phone, you can read this article to learn how to find out. If you still have iOS 6 on your iPhone and do not want to update to IOS 7, then you will need to download one of the third-party flashlight apps from the App Store. But if you have iOS 7 you can follow the steps below to start using your iPhone as a flashlight. App developers frequently release updates with new features as well as fix patches to clear out the in-app errors that are causing issues on your phone.
Therefore, if you're facing issues with the third-party camera app, make sure that you've updated the app to the latest version. If the iPhone users follow all the above-mentioned steps properly, they can solve the black screen issue of the mobile camera without taking the help of iPhone camera repair service provider. DFU mode and recovery mode are used to reset the device.
Recovery mode allows users to restore and update firmware. When users access to recovery mode, the device will display iTunes and the data cable icon on iPhone, while DFU mode is used to forcibly update and downgrade firmware. In the DFU mode, the iPhone will be black in the whole restoring process. This malfunction is more or less related to the camera or flash.
The device breaks down when, for example, an overheating signal appears or the camera simply stops functioning, and when you try to use it, only a black screen is visible. Of course, catching the owner of the smartphone by surprise, the lack of light from the flashlight deprives us of a useful function. You can seek help by contacting the service center. Consider the reasons for the appearance of breakdowns of this kind.
The following descriptions also apply if the flashlight on iPhone 4 or the flashlight on iPhone 5s does not work. If the issue is severe, then the recovery mode might not be able to fix iPhone XS/X/8/7/6 flashlight not working problem. In this case, you can boot your phone in the Device Firmware Update mode instead.
This would even skip the bootloading process and will let you restore as well as update your device. Though, while doing so, it will erase its existing data and saved settings. You don't need to unlock your iPhone to enable the flashlight from the lock screen.
It works just like a Physical button in the real world. All you have to do to turn on the flashlight from the lock screen is to wake up your iPhone screen and press hard on the flashlight icon. My phone was around 80 percent charged when I got the "Flash is Disabled" warning. Firstly, I tried to close and open the camera app again. I had done this around 4-5 times, but it didn't help me. Even after topping my iPhone's battery to 100 percent, I was stuck with the same issue.
To help you, we've come up with our troubleshooting guide on how to fix the iPhone camera problems. So, whether you get a black screen or blurred photos, every time you open the camera app, or if you just can't find the Camera app on your iPhone, this guide will help you fix them. Also, if you're not able to use your iPhone camera with a specific app, let's say Instagram, this guide will help you fix that issue as well.
The common way to fix iPhone black screen camera issue is to reset the power cycle of the device by pressing the Power (Wake/Sleep) button of the device for a few seconds. This will help to display the Power Slider on the screen of the iPhone. After that slide and turn off the phone and wait for 30 seconds before pressing the Power button to turn your device on. If the iPhone users follow all the above-mentioned steps properly, they can solve the black screen issue of the mobile cam without taking help ofiPhone camera repair serviceprovider. The common way to fix iPhone black screen camera issue is to reset the power cycle of the device by pressing Power (Wake/Sleep) button of the device for few seconds. In case if the device displays the iTunes or Apple logo in the end, then you need to restart the process.
Ideally, it should only display a black screen when iTunes will detect your iPhone is in the DFU mode. It will give you an option to restore the device to its factory settings now by displaying a prompt like this. Tap the flashlight icon on iPhone Control Center to turn on the camera flash. If the flashlight icon turns to gray, you should close Camera app or video apps first. This trick may help you to deal with the black screen problem without going to an iPhone repair workshop. Sometimes the users observe the front camera of the iPhone is not working well.
In this situation, switch to the rear-cam by tapping on the camera icon, and after a few moments when you turn on the front camera, you may find the black screen issue is gone. IPhone is a perfect smart gadget with unique features and functionalities of sleek design and advanced automation technology made by 'Apple'. Nevertheless, mobile users complain about the malfunctions of the camera in iPhone. It is often observed that instead of providing the front view or rear clearly, the camera does not function properly and shows a black screen.
This issue can be frustrating for the users, so they seek iPhone camera repair service to fix the black screen problem. The iPhone flashlight uses the flash for the camera as a flashlight, and not the screen like some early flashlight apps did. The camera flash is a better option and for users as a brighter, more direct way of seeing what is going on. Constant notifications can sap your attention span until it's impossible to get anything done. You can make these alerts less distracting by removing the preview snippets that come with them and tempt you to immediately check your phone. As an added bonus, changing this setting will protect your notifications from snoops who look at your lock screen.
To remove the previews, open Settings and tap Notifications, then Show Previews, and finally Never. Several problems were experienced with the iPhone 5S's hardware after its release. The most widely reported issue is that the angle reported by the phone's level sensor had drifted by several degrees, which caused the gyroscope, compass, and accelerometer to become inaccurate. Reports suggested that this is a hardware-induced problem. Some of these issues have since been fixed by software updates. Let go of the respective keys when the connect-to-iTunes symbol would appear and the application will detect that your device is in the recovery mode.
It will display a similar prompt like this and would ask you to restore your device. Agree to it and reset your iPhone while fixing the iPhone flashlight not working issue. Just be aware that this would delete all the saved data from your phone. The device would restart with the updated firmware and in the normal mode.
You can now remove the device and check if its flashlight works or not. If not, follow the same process, but pick the advanced mode instead of the standard mode this time. If a native solution is not able to fix iPhone 6/7/8/X flashlight not working issue, then consider using a professional tool. Developed by Wondershare, dr.fone - Repair can fix all kinds of firmware related issues with an iPhone. Some of the common problems that it can fix are iPhone flashlight not working, device stuck in reboot loop, the screen of death, a bricked device, and so on.
The tool is extremely easy to use and has two modes – standard and advanced. The standard mode can resolve most of the iPhone issues without causing any data loss on the device. Here's how you can use this iOS system repairing tool on your own.
If there is a problem with your phone's settings or the device has been corrupted, then you should perform a factory reset. This would reset your device's settings and will wipe off its storage. Since your data would be erased in the process, consider taking its backup beforehand using dr.fone – Backup & Restore . With just one click, you can take your iPhone's backup and later restore it to your device.
Once it is done, you can fix the iPhone flashlight not working issue by following this simple drill. If you cannot turn on flashlight properly, you should check the hardware first. Go to the Camera app and try to enable camera flash. If the camera flash lights, that means flashlight of iPhone not working is not the responsibility of hardware. See the below settings for use LED fleshlight on camera.
The open Camera app, tap on the flash icon and select "On" option from the top camera app tab. This solution generally works when the flashlight icon is greyed out when you are using another app simultaneously. In this case, you will need to make sure that the app you are running isn't accessing your phone's camera. To fix the issue, you simply need to terminate the other mobile app. Generally speaking, Flashlight Not Working issue is not a hardware issue on the iPhone. If you can't fix it by resetting or restart iPhone, you may try some other iOS system issue troubleshooter.
Like AnyFix, a newly released system repair tool, which supports tofix over 130 system problems and over 200 iTunes issues. Once you encountered iPhone problems, like stuck on a black screen, stuck on the Apple logo, keeps restarting, frozen, etc. Follow the next detailed steps and fix the Flashlight Not Working issue.
If you've tried all the methods to fix the iPhone camera black screen or not working issues, and nothing has helped you, perform a DFU Restore. This method will reload the software and firmware of your iPhone. If you're still not able to fix your iPhone camera problems, you must reset all settings on your iOS device.
Doing this will reset your wallpaper, clear out your Wi-Fi passwords, and restore other settings to their defaults. Also, it's worth mentioning that resetting all settings will not delete any files or data on your iPhone. Therefore, there's no need to backup your data in this process. We've listed some commonly faced camera issues by iPhone users. We've also included some methods on how to fix software issues on your iPhone camera.
